Search This Supplers Products:solenoidSolenoid ValveSolenoid CoilValve
sourcedevin
publishercynthia
time2017/06/13
One advantage of using a solenoid is that low-current wires can be routed to a remote switch that controls the solenoid's operation.
Things You'll Need:
1.Solenoid
2.Solenoid control switch
Step 1
Install the solenoid in the location recommended by the chosen application's instructions.
Step 2
Install the solenoid control switch.
Step3
Measure the distance between the solenoidand the controlled device.
Step4
Fabricate the solenoid cables.
Step5
Install the cable between the solenoidand its controlled device.
Step6
Install the cable between the othersolenoid terminal and the battery or bus bar.
Step7
Wire the solenoid's control circuit.
Step8
Test the solenoid by engaging the controlswitch.
24V Push Pull Starter Solenoid For Komatsu
Part No.:KDO-47100-3940
24V Engine Stop Solenoid For Diesel Engine Parts
Part No.:3054610
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.